|
With our years of experience working with high pressure, we have designed and engineered many quality systems that meet the stringent requirements of all our clients. Some of the systems that we have done range from simple liquid test pacs, that is able to do everyday testing, to high pressure flushing or actuator control.
Applications of these systems has no boundaries, where high pressure is concern. With careful planning and selection of components that make up the system, allow our experienced engineers to understand your requirements and advise accordingly.
These are just some of the units that we have done for some of our clients. Possibilities are infinite!
Contact us to know more about what we can do for you.
PORTABLE LIQUID TEST PACS
Hydratech Industries have designed a range of self-contained, ready to operate Portable Test Pacs for per-forming high pressure hydrostatic testing on components. They only require nominal air supply pressure to operate and can reach a maximum pressure of up to 100,000 psi.
|
|
M SERIES LIQUID TEST PAC (1/3HP)
- Pressure up to 15,000 psi. (1030 bar)
- Flow rates up to 3 gpm. (12 l/min)
- 25 models.
- All Hydraulic Liquids, Water-plain or DI, Solvents, Mild Chemicals, Liquefied gases.
- All models operate on an air drive of between 25—125 psi (1.8—9 bar).
- Hand pump option available for applications requiring precision pressure control or where no air drive is available.
|
 |
A SERIES LIQUID TEST PAC (2HP)
- Pressure up to 100,000 psi. (3100 bar)
- Flow rates up to 5 gpm. (19 l/min)
- 97 models.
- All Hydraulic Liquids, Water-plain or DI, Solvents, Mild Chemicals, Liquefied gases.
- By stacking air pistons in double or triple airheads, this pump range can be increased from 1.5HP to 2.2HP.
|
|
|
G SERIES LIQUID TEST PAC (6HP)
- Pressure up to 10,000 psi. (700 bar)
- Flow rates up to 23 gpm. (87 l/min)
- 20 models.
- All Hydraulic Fluids, Water-plain or DI, Solvents.
|
|
|
8-SERIES LIQUID TEST PAC (8HP)
- Pressure up to 22,500 psi. (1530 bar)
- Flow rates up to 12 gpm. (45 l/min)
- 9 models.
- All Hydraulic Fluids, Water-plain or DI, Solvents, Liquefied gases.
- Displacement per stroke, double acting output and efficient use of drive air or gas gives this range a decided advantage over smaller pumps in the same pressure range.
|
PORTABLE GAS BOOSTERS
Hydratech Industries have designed ready to operate Portable Gas Booster units for fast, efficient and eco-nomical method of gas testing as well as charging gas pressure in many devices. These units ensure the optimum use of commercially bottled gases down to as low as 150psi and is capable of charging cylinders or accumulators to up to 3,000 psi or more. With all the necessary components installed, these units are easily operable even by untrained personnel.
|
|
HAND-CARRY AG-75 GAS BOOSTER
- Pump Pressure up to 16,000 psi.
- Compact and Portable.
Optional Items
- High Pressure Hoses.
- Charging Kit. (For Charging Accumulators) Portable casing or Cylinder mounting.
- Portable casing or Cylinder mounting.
Portable casing or Cylinder mounting.
|
|
|
AGT 15-30 GAS BOOSTER
- Pump Pressure up to 6,000 psi.
- Skid Housing.
- For different types of gases.
Optional Items
- Auto Start/Stop.
- High Pressure Hoses.
|
|
|
HALON GAS TRANSFER UNIT
- Uses pump to transfer and pressurizes the Halon to the extinguisher.
- Able to pump against the pressure of Nitrogen.
- Resultant resistance will create instant mixing.
- Able to extract high cost of Halon vapor back to liquid by passing through a condenser.
|
HPUs
Hydratech Industries has systems that are specially designed to flush sub-sea trees, BOPs and actuators control, with high pressure pumps installed. Units can also be designed for high pressure testing in various products easily and safely. These are just some of the systems that we have customized to meet different customers’ requirement.
|
|
MOBILE FLUSHING HPU
- Simple compact design for mobility.
- Easy setup and operation.
- Flexible high pressure hose for accessing hard to reach subjects with reel for easy & convenient storage.
- Other customizable options available.
|
|
|
HYDRAULIC ACTUATOR CONTROL SYSTEM
- Customized system for controlling existing customer’s actuator system.
- Charged accumulator ensures smooth and constant pressure control. Unit comes with a set of high pressure hoses and quick disconnect couplings. Unit comes with a set of high pressure hoses and quick disconnect couplings.
- Unit comes with a set of high pressure hoses and quick disconnect couplings.
|
|
|
LARGE VALVE HYDROTESTER
- Testing of large valves with high pressure liquids.
- Liquid pump able to provide testing pressure up to 22,500 psi.
- Provides quick pressure build up with higher flow rate for efficient testing of larger valves.
- Built in safety features such as in-operation light, door open cut-off switch and sliding rack for operator’s safety.
|
|
